Edit:
To print the ground, all information are now on Eurobot website
http://eurobot.org/eurobot/eurobot-2017/rules
Be careful, to use the good pdf.
It's good this year to not have to print the ground and using a sticker instead.
Unfortunately the company selected by PlaSci doesn't deliver outside France.
http://www.planete-sciences.org/robot/d ... _tapis.pdf
Should not be a big problem to find a company that send in Europe. So If you find a good company you can share it here.
English name seems to be Floor sticker
There is an anti-slip layer
Description on the french website is very poor. But I suppose it's a kind of vinyl
I also suppose the layer is pretty thin
Eurobot 2017 - Printing for the ground
Eurobot 2017 - Printing for the ground
Last edited by Grinwald on Wed 19 Oct 2016, 07:40, edited 2 times in total.
Re: Eurobot 2017 - Printing for the ground
If your only solution involves the need from someone in France to buy from the "offical" supplier and then deliver it to you, send me a PM. I'll see how I can help.
- Aurélien Bonnet
- Posts: 44
- Joined: Fri 21 Nov 2014, 18:21
Re: Eurobot 2017 - Printing for the ground
Hello,
For the team from European country, you can buy the mat on the website Pixart Printing.
It is the same mat that tghe other company.
I create the files for Pixart Printing as soon as possible, they will be available on the Eurobot website.
I hope this help you
Best regards
For the team from European country, you can buy the mat on the website Pixart Printing.
It is the same mat that tghe other company.
I create the files for Pixart Printing as soon as possible, they will be available on the Eurobot website.
I hope this help you
Best regards
Aurélien Bonnet
Chargé de missions rencontres de robotique
Planète Sciences
Poste direct : 01-69-02-76-18
E-mail : aurelien.bonnet@planete-sciences.org
Chargé de missions rencontres de robotique
Planète Sciences
Poste direct : 01-69-02-76-18
E-mail : aurelien.bonnet@planete-sciences.org
- romain_cvra
- PMI
- Posts: 1240
- Joined: Sat 30 Jun 2007, 16:17
- Location: suisse
- Contact:
Re: Eurobot 2017 - Printing for the ground
Hello,
Thank you very much Aurélien, I ordered.
Best regards
Thank you very much Aurélien, I ordered.
Best regards
Re: Eurobot 2017 - Printing for the ground
Thanks great, I'll edit my first post