Page 1 of 1

Eurobot 2017 - Printing for the ground

Posted: Sun 16 Oct 2016, 10:20
by Grinwald
Edit:
To print the ground, all information are now on Eurobot website
http://eurobot.org/eurobot/eurobot-2017/rules

Be careful, to use the good pdf.

It's good this year to not have to print the ground and using a sticker instead.
Unfortunately the company selected by PlaSci doesn't deliver outside France.
http://www.planete-sciences.org/robot/d ... _tapis.pdf

Should not be a big problem to find a company that send in Europe. So If you find a good company you can share it here.

English name seems to be Floor sticker
There is an anti-slip layer
Description on the french website is very poor. But I suppose it's a kind of vinyl
I also suppose the layer is pretty thin

Re: Eurobot 2017 - Printing for the ground

Posted: Mon 17 Oct 2016, 21:15
by arno
If your only solution involves the need from someone in France to buy from the "offical" supplier and then deliver it to you, send me a PM. I'll see how I can help.

Re: Eurobot 2017 - Printing for the ground

Posted: Tue 18 Oct 2016, 14:19
by Aurélien Bonnet
Hello,

For the team from European country, you can buy the mat on the website Pixart Printing.

It is the same mat that tghe other company.

I create the files for Pixart Printing as soon as possible, they will be available on the Eurobot website.

I hope this help you

Best regards

Re: Eurobot 2017 - Printing for the ground

Posted: Tue 18 Oct 2016, 17:12
by romain_cvra
Hello,

Thank you very much Aurélien, I ordered.

Best regards

Re: Eurobot 2017 - Printing for the ground

Posted: Wed 19 Oct 2016, 07:37
by Grinwald
Thanks great, I'll edit my first post