Eurobot 2017 - Printing for the ground

The most famous international Robotics contest for young people.
User avatar
Grinwald
Posts: 145
Joined: Tue 11 Nov 2003, 10:50
Location: Switzerland
Contact:

Eurobot 2017 - Printing for the ground

Post by Grinwald » Sun 16 Oct 2016, 10:20

Edit:
To print the ground, all information are now on Eurobot website
http://eurobot.org/eurobot/eurobot-2017/rules

Be careful, to use the good pdf.

It's good this year to not have to print the ground and using a sticker instead.
Unfortunately the company selected by PlaSci doesn't deliver outside France.
http://www.planete-sciences.org/robot/d ... _tapis.pdf

Should not be a big problem to find a company that send in Europe. So If you find a good company you can share it here.

English name seems to be Floor sticker
There is an anti-slip layer
Description on the french website is very poor. But I suppose it's a kind of vinyl
I also suppose the layer is pretty thin
Last edited by Grinwald on Wed 19 Oct 2016, 07:40, edited 2 times in total.

arno
PMI
Posts: 700
Joined: Wed 23 Jun 2004, 21:51
Location: Un peu partout...

Re: Eurobot 2017 - Printing for the ground

Post by arno » Mon 17 Oct 2016, 21:15

If your only solution involves the need from someone in France to buy from the "offical" supplier and then deliver it to you, send me a PM. I'll see how I can help.

User avatar
Aurélien Bonnet
Posts: 44
Joined: Fri 21 Nov 2014, 18:21

Re: Eurobot 2017 - Printing for the ground

Post by Aurélien Bonnet » Tue 18 Oct 2016, 14:19

Hello,

For the team from European country, you can buy the mat on the website Pixart Printing.

It is the same mat that tghe other company.

I create the files for Pixart Printing as soon as possible, they will be available on the Eurobot website.

I hope this help you

Best regards
Aurélien Bonnet
Chargé de missions rencontres de robotique
Planète Sciences
Poste direct : 01-69-02-76-18
E-mail : aurelien.bonnet@planete-sciences.org

User avatar
romain_cvra
PMI
Posts: 1112
Joined: Sat 30 Jun 2007, 16:17
Location: suisse
Contact:

Re: Eurobot 2017 - Printing for the ground

Post by romain_cvra » Tue 18 Oct 2016, 17:12

Hello,

Thank you very much Aurélien, I ordered.

Best regards
Site web : http://www.cvra.ch.
Le code source : GitHub
Visualisation CAO 3D de nos robots : GrabCAD

User avatar
Grinwald
Posts: 145
Joined: Tue 11 Nov 2003, 10:50
Location: Switzerland
Contact:

Re: Eurobot 2017 - Printing for the ground

Post by Grinwald » Wed 19 Oct 2016, 07:37

Thanks great, I'll edit my first post

Post Reply